Material Difference
It was only fitting that the design of a center dedicated to the visual arts on the campus of Franklin & Marshall College feature an interplay of materials � from glass and concrete to steel and...

Pay Now, Or Pay Later � Using A Risk-Informed Mindset for Site Investigation Decisions
How much subsurface investigation is adequate to aid in the planning and design of a construction project? It�s a question every geo-professional must grapple with, particularly in an era where cost efficiency...

Moving Down the Road of Progress: Geosynthetics Subdue Failures on Expansive Clays and Frost-susceptible Soils
Using geosynthetics in roadway projects has provided sustainable alternatives for reconstruction and maintenance and now represents a significant portion of the total geosynthetics market. Geosynthetics...

Design of Shoreline Protection Measures : The Importance of Geotechnical Engineering in Waterfront Design
Over the past decade, there�s been an increased realization of the need to better protect our shorelines, particularly in urban environments along coastlines that have already been impacted by storm surge...

Seismic Performance of a Deep Soil Mixing Grid: A Magnitude 7.1 Load Test at the Port of Alaska
The Port of Alaska in Anchorage (Port) has embarked on a multiphase modernization program that includes the development of a new petroleum and cement terminal (PCT) berth. The berth consists of a pile-supported...

Tsunami Loads and Effects
Guide to the Tsunami Design Provisions of ASCE 7-16
The devastating tsunamis that struck Chile and Japan in 2010 and 2011 underscored the critical need for new structural design criteria to improve building resilience and safeguard human life. They also...

Floating on Air
The National Aeronautics and Space Administration has designed a concept for how Venus�which has a surface that is hot enough to melt lead�can be safely explored by astronauts....

Purging the Plastics
A full-scale floating system designed to clean up the Great Pacific Garbage Patch for a fraction of the cost and time of traditional methods has been deployed....

One Small Step
A concept design for an inflatable habitat on Mars incorporates indigenous ice as a structural element and a shield to protect occupants from galactic cosmic radiation....

Delegate, Network, and Ask for What You Want
Justin Siegrist, P.E., M.ASCE, is the hydraulic modeling lead in the Cincinnati office of Wade Trim. His advice to young engineers: delegate, network, and ask for what you want....

Design of Submarine Pipelines Against Upheaval Buckling
This paper describes part of a comprehensive joint-industry project on upheaval buckling. It develops a semi-empirical simplified design method and detailed design methods based on a new numerical analysis,...

Journal of Transportation Engineering, Part B: Pavements
The Journal of Transportation Engineering, Part B: Pavements will contain technical and professional articles on the planning, design, construction, maintenance, and operation of airport, roadway and other...

The Leaning Towers of Wilmington, Delaware: Emergency Response and Retrofit of the I-495 Viaduct to Address Lateral Squeeze
On a sunny, summer afternoon last June, the project manager for AECOM's open-end bridge design contract with the Delaware Department of Transportation (DelDOT) received an...

Evaluation of Vertica Retaining Wall Systems
Prepared by the Highway Innovative Technology Evaluation Center (HITEC). This report describes a HITEC evaluation designed to determine the basic capabilities...

Very Long-Term Care of Mechanically Stabilized Earth Berms: Limiting the Liability of Future Stakeholders
Since their development over 50 years ago, civil engineering applications of mechanically stabilized earth (MSE) berms have significantly increased. When used as a component of an asset...

Introduction
Many institutions and private industry organizations have prepared guidance documents with the latest scientific and engineering information on proper design, installation, maintenance,...

Design Considerations Common To All Permeable Pavements
Impervious cover in watersheds without controls result in increased stormwater runoff and decreased groundwater recharge in response to rainfall events. This increased runoff can be the...

Porous Asphalt and Permeable Friction Course Overlays
Porous asphalt typically consists of conventional warm mix asphalt (WMA) or hot mix asphalt (HMA) with significantly reduced fines resulting in an open-graded mixture that allows water...

Permeable Interlocking Concrete Pavement (PICP)
Permeable interlocking concrete pavement (PICP) consists of (impervious) manufactured concrete units that form permeable voids and joints, when assembled into a laying pattern. The openings...

Grid Pavement
Open grid pavements consist of concrete or plastic units with large surface openings filled with a permeable joint material, typically small aggregate (ASTM No. 8 or No. 89), sand, or...

 

 

 

 

Return to search